Question: How do you hook up a subwoofer to a home theater system?

Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receivers subwoofer output to the subwoofers line input. Klipsch subwoofers can be connected via the LFE channel, the white RCA connection, or in a stereo pair by using both the white and red RCA connections.

How do you set up a subwoofer?

Set that volumeFirst, set the crossover. This is the frequency at which your subwoofer starts playing bass notes. Next, adjust the gain (or volume). If you have a phase switch, switch it between 0 and 180 degrees and see if you hear a difference.21 Jan 2014

Can I hook up a car subwoofer to my home stereo?

You can hook up a car subwoofer to a home stereo directly if: You have a subwoofer or more than one subwoofer that can be wired for at least 8 ohms total. This can be two 4 ohm subwoofers or a 4 ohm dual voice coil (DVC) subwoofer.

Which way should a subwoofer face?

Here is the short answer. For the best sound quality, the subwoofer should be placed with the speaker facing out to the room, and the port should be away from a wall. Bass waves travel in all directions, but its important to have the speaker facing your main listening area.

Tell us about you

Find us at the office

Hallaran- Gromley street no. 38, 38408 Dodoma, Tanzania

Give us a ring

Chelci Patoka
+98 278 710 671
Mon - Fri, 9:00-20:00

Reach out